trouble..... need a lil help

So i am wondering if the gasket between the turbo and the manifold is like an oem gasket i can just buy at a store... if not what type of gasket would that be...

and i took off some of the piping of the intercooler... and i got a bunch of bunch of oil come out...
is that normal... and when i mean a lot i mean it as like there was oil built up to the hoses...

i think thats all i have right now...

bad turbo.

i agree, bad turbo! seals are shot

no, it is not normal to have 2 gallons of oil in your intercooler...

gallons is pushing it haha...
but as i took the piping off the side. enough to make a 8 inch round puddle on the ground
thats about how much oil lol....

anybody know about the gasket between the manifold and turbo?

any t25 gasket should work. if its the stock sr stuff youre talking about.

no always a bad turbo when you have oil in the IC pipes. could just be a large amount of blowby. try a catch can before buying a turbo.

Yea do u have any sort of a catch can set up? and that much oil in the IC pipes is not good at all, that gasket u can get at ur local tune shop along with other gaskets if its not a stock turbo

well as per the gasket problem i used a liquid gasket and it worked fine. a friend of mine ordered his gasket off ebay and also had no problems. however with that much oil in your ic piping it sounds like a blown turbo

yea its the stock turbo....
im just getting a new turbo elbow
and downpipe and that comes with the gaskets...

and yes i do have a catch can. its just not set up to well
so maybe that might be a problem for some of it...

i also need the studs going from the mani to the turbo...
anybody know the size of those stubs for a stock turbo?

nick your gonna have to some check it out after i replace this oil pump...
which is how my easter is getting spent lmao...