Midwest240sx
Would you like to react to this message? Create an account in a few clicks or log in to continue.

NEEd help crank no start

+2
iroc2
nismo03
6 posters

Go down

NEEd help crank no start Empty NEEd help crank no start

Post by nismo03 Sun Jul 11, 2010 10:27 pm

Need some help guys me and my buddy put in a mishimoto radiator and everything was going fine my buddy decided itd be a good idea to burp the coolant in well my car ran just fine for all of about 20 mins because coolant shot everywhere!!! my car died and i wasnt get shit no spark or fuel i replaced the dizzy and the car started getting fuel but i am still getting no spark!! ne help would be greatly apprieciated
nismo03
nismo03

Number of posts : 109
Age : 35
Location : Woodridge
Vehicle : 93 240sx
Registration date : 2010-01-28

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by iroc2 Wed Jul 14, 2010 11:06 pm

did you try the wires yet? like do you know if they are still good?
iroc2
iroc2

Number of posts : 465
Age : 32
Location : Lansing Il
Registration date : 2009-07-28

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by 600SX Thu Jul 15, 2010 12:06 pm

Maybe I could help if I knew what a dizzy is.
600SX
600SX

Number of posts : 72
Age : 43
Location : Twin Lakes, WI
Vehicle : 96 240SX
Registration date : 2009-03-01

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by rps1392 Thu Jul 15, 2010 12:22 pm

distributor,,, it has a hall effect sensor inside used for cam position
rps1392
rps1392

Number of posts : 91
Vehicle : 92 240sx
Registration date : 2010-04-22

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by 600SX Thu Jul 15, 2010 12:25 pm

Is the coil good?
600SX
600SX

Number of posts : 72
Age : 43
Location : Twin Lakes, WI
Vehicle : 96 240SX
Registration date : 2009-03-01

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by X1nom3D Mon Jul 19, 2010 10:14 pm

hahaha. i'm guessing that the coolant shooting everywhere caused a short in a circuit, which caused it to die. probably fried your ecu doing that. or just wait for all the nook and crannies to dry up.
X1nom3D
X1nom3D

Number of posts : 57
Location : Wisconsin
Vehicle : Red 91 FB
Registration date : 2009-09-14

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by kg300zxtt Mon Jul 19, 2010 10:43 pm

It looks like you fried something with that coolant so first of all check or fuses just make sure its dry, coolant don't dry fast like water so use a air compressor or leaf blower to get everything out worst case or wires are fried or ecu bit the engine cranks just no spark seems like its something else.

Number one rule whenever you work on a car disconnect the battery trust me its a rule for a reason.

another thing when you replace a radiator you have to bleed the air out when its cold when it worms up you will start getting bubbles then when its hot only coolant will come out then you're done. Never open a bleeder when coolant is hot it will burst and burn you shitless.

good luck.
kg300zxtt
kg300zxtt

Number of posts : 87
Age : 37
Location : Chicago
Vehicle : 98 S14--95 s14 KA power
Registration date : 2010-01-28

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by rps1392 Tue Jul 20, 2010 12:25 am

the car slowely died out,, and i told the kid to bleed it with the bleeder screw but,, his "burb the coolant" was the easiest way..

the whole interior is gutted dash is out all wires and fuses are perfect,

and the coil is good i highly doubt it's the ecu

ima try a few more things , cause this car is pissing me off everytime we get something working another thing takes a shit

thanks for the advice keep it coming
rps1392
rps1392

Number of posts : 91
Vehicle : 92 240sx
Registration date : 2010-04-22

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by kg300zxtt Tue Jul 20, 2010 9:31 am

I also had a problem with no spark and after a while it was a stupid ground connection i cleaned it than started right up but timming was way off cause i took the distributor out. It seems when you do something you always do something else wrong. Thats a 240 way. Amen
kg300zxtt
kg300zxtt

Number of posts : 87
Age : 37
Location : Chicago
Vehicle : 98 S14--95 s14 KA power
Registration date : 2010-01-28

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by rps1392 Tue Jul 20, 2010 10:32 am

ok ill check them all chances are they are bad,, but the things that gets us upset is that it ran fine for like 15 mins then just died

thanks for the help
rps1392
rps1392

Number of posts : 91
Vehicle : 92 240sx
Registration date : 2010-04-22

Back to top Go down

NEEd help crank no start Empty Re: NEEd help crank no start

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum