Grounding Kit
3 posters
Midwest240sx :: Forums :: Technical
Page 1 of 1
Grounding Kit
Hey. I picked up some 4 awg wire and connectors for cheap and was going to be adding extra grounds to the engine. I was just wondering peoples opinions on my schematic I was thinking about. Here is a picture of the wire routing ....
here is some detail on the route:
1. negative battery terminal
2. passenger side strut tower
3. intake manifold
4. driver side valve cover
5. driver side strut tower
Let me know what you think. Thanks!
P.S. THIS IS A GENERIC PICTURE ... NOT MY ENGINE!
here is some detail on the route:
1. negative battery terminal
2. passenger side strut tower
3. intake manifold
4. driver side valve cover
5. driver side strut tower
Let me know what you think. Thanks!
P.S. THIS IS A GENERIC PICTURE ... NOT MY ENGINE!
Bassboy3313- Number of posts : 238
Age : 35
Location : Brookfield,WI
Vehicle : 91 240sx hatch and 95 Buell Thunderbolt 1200cc
Registration date : 2010-02-01
Re: Grounding Kit
just to intake to chassis, intake to negative bat terminal etc. maybe run a few grounds bolted to the stock engine grounds for the harness as well. Nice to see someone actually doing stuff like this. Most people don't realize how much little stuff like this can actually help a bit.
zerepdivad- Number of posts : 98
Registration date : 2010-06-26
Re: Grounding Kit
I wired it up in series in the route that i posted, it seems to have a slightly better idle and acceleration smoothened out a bit. i still got a idle dip problem that i think is a bad maf, not too sure tho.
Bassboy3313- Number of posts : 238
Age : 35
Location : Brookfield,WI
Vehicle : 91 240sx hatch and 95 Buell Thunderbolt 1200cc
Registration date : 2010-02-01
Re: Grounding Kit
I just did this today but not because of idle issues. But because mr2's are prone to fires!!
pancho y onions- Number of posts : 145
Registration date : 2009-01-30
Re: Grounding Kit
thats a good reason to do it then.
Bassboy3313- Number of posts : 238
Age : 35
Location : Brookfield,WI
Vehicle : 91 240sx hatch and 95 Buell Thunderbolt 1200cc
Registration date : 2010-02-01
Midwest240sx :: Forums :: Technical
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|