have a question?
3 posters
Midwest240sx :: Forums :: Technical
Page 1 of 1
have a question?
I have my boost set at 13lbs.... What would cause the turbo to only boost 5lbs at time and 13 at others like it should?
it sounds like I have an exhaust leak...would that do it?
it sounds like I have an exhaust leak...would that do it?
boosted97sx- Number of posts : 155
Age : 45
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: have a question?
Yea it would. I had an exhaust leak last week and it wasnt boostin right. Fixed it and boost was perfect.
Re: have a question?
guess ill have to tear things down and take a look here in a lil while always somethin
boosted97sx- Number of posts : 155
Age : 45
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: have a question?
Could be a leak in the intake system too, can't hurt to check.
240sxguy- Admin
- Number of posts : 456
Age : 44
Location : Madison, Wi
Vehicle : 1995 240sx
Registration date : 2009-01-20
Re: have a question?
its the gasket where the turbo bolts to the manifold , just found it not gonna take it aprt and see if i can find a gasket somewhere around here
boosted97sx- Number of posts : 155
Age : 45
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: have a question?
I couldnt find one so i bought a 2x3ft section of exhaust gasket paper and made like 6 of them still have some left.
Re: have a question?
have a feeling thats what im gonna have to do to
boosted97sx- Number of posts : 155
Age : 45
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: have a question?
yeah if you got a part # that would be great
boosted97sx- Number of posts : 155
Age : 45
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: have a question?
Felpro Part #'s
3009 for fiber on one side $8.99 for a 12x 28 x 3/64 sheet
2499 for fiber on both sides $11.99 for a 12 x 28 x 1/16 sheet
they have a metal center so its gonna take some effort to make them. I used a brake line (cut), chisel, hammer, and now ruined counter at NAPA.
3009 for fiber on one side $8.99 for a 12x 28 x 3/64 sheet
2499 for fiber on both sides $11.99 for a 12 x 28 x 1/16 sheet
they have a metal center so its gonna take some effort to make them. I used a brake line (cut), chisel, hammer, and now ruined counter at NAPA.
Re: have a question?
lol cool thanks
boosted97sx- Number of posts : 155
Age : 45
Location : New Orleans / Central IL
Registration date : 2009-01-27
Midwest240sx :: Forums :: Technical
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|