new to forum and my beast
+5
eS 13_maJiK
LongGrain
simon
jayys
forcedtojoin
9 posters
Midwest240sx :: Forums :: Progress
Page 1 of 2
Page 1 of 2 • 1, 2
new to forum and my beast
i would first of all like to say first official post on this forum i dont exectly know y i joined other then the fact i was forced into it my 240sx is coming to its final stages you guys will see pics posted soon and what not i was happy to get it out on the road the other week and find out how easy ka trans blow up on fully built engines
i am holding down the ka24de its a 91 nissan 240sx stock body with a bad a** paint job and what not slammed and a few other things i think why down grade to an sr20 ... im to poor for a beer can engine
ka24de
eagle rods
cp pistons'
garrett t3 t4 turbo
custom made turbo manifold with hks 40mm waste gate
fidanza lightweight aluminum flywheel spec stage 3 clutch
greddy rs BOV
greddy ls front mount
brian crower stage 2 cams ETC...
all around about a 400 + whp drift car (when the tranny doesnt self desteruct) im happy with how it came out and yes my engine is half bad A** and i thought i would keep the pink intake manifold so do something about it im so confortable with my sexuallity i can rock a pink intake manfold
got big plans for next winter on a whole new engine swap already in the process of being built
bad pic of new paintjob it looks insanely hot this was before we fully assembled it again the front bumper still isnt even connected and im rockin steelys ---dont you love the blue tape under the hood and green tape in the doors and i took off my moon roof for paint so i have one hook or flap stickin up ya thats jdm
i am holding down the ka24de its a 91 nissan 240sx stock body with a bad a** paint job and what not slammed and a few other things i think why down grade to an sr20 ... im to poor for a beer can engine
ka24de
eagle rods
cp pistons'
garrett t3 t4 turbo
custom made turbo manifold with hks 40mm waste gate
fidanza lightweight aluminum flywheel spec stage 3 clutch
greddy rs BOV
greddy ls front mount
brian crower stage 2 cams ETC...
all around about a 400 + whp drift car (when the tranny doesnt self desteruct) im happy with how it came out and yes my engine is half bad A** and i thought i would keep the pink intake manifold so do something about it im so confortable with my sexuallity i can rock a pink intake manfold
got big plans for next winter on a whole new engine swap already in the process of being built
bad pic of new paintjob it looks insanely hot this was before we fully assembled it again the front bumper still isnt even connected and im rockin steelys ---dont you love the blue tape under the hood and green tape in the doors and i took off my moon roof for paint so i have one hook or flap stickin up ya thats jdm
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
welcome.. but drift car? final stages? what you need to do is at least slam it and get wheels before that man.
simon- Number of posts : 1186
Age : 34
Location : chi
Vehicle : s13
Registration date : 2009-01-19
Re: new to forum and my beast
oh its pretty slammed its the just the engine is out of it and when i take it out the engine bay shoots sky wards i got a body kit coming and the body kit will have me barely off the ground and as for rims im doin a full 5 lug conversion and i am getting a set of volk te37 ... i had a set of tenzo mach 10s for my four lug but got rid of them since the 5 lug is right around the corner
and my name is vince but alot of people call me choncey
and my name is vince but alot of people call me choncey
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
lol come on vince, slammed? not even close.
LongGrain- Number of posts : 726
Registration date : 2009-04-16
Re: new to forum and my beast
no compared to u i couldnt even stick a nut sack hair under ur side skirts
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
^tru dat. I will be pretty jealous if you score some te37's
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Re: new to forum and my beast
haha im goin all out to get them
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
welcome. what trim turbo you running? what are ya gonna tune it with?
Flicktitty- Admin
- Number of posts : 1546
Age : 37
Location : Wisconsin
Registration date : 2009-01-19
Re: new to forum and my beast
its a garrett t57 custom built t3 twin scroll
and just the enthalpy ecu tune for 850cc injectors
stock air flow sensor
remove speed limit
and raise rev limit
its only a for the time being tune
and just the enthalpy ecu tune for 850cc injectors
stock air flow sensor
remove speed limit
and raise rev limit
its only a for the time being tune
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
forcedtojoin wrote:its a garrett t57 custom built t3 twin scroll
and just the enthalpy ecu tune for 850cc injectors
stock air flow sensor
remove speed limit
and raise rev limit
its only a for the time being tune
Ditch the enthalphy and go calum or nistune. Cheaper and they are real time...
Re: new to forum and my beast
it is i fixed my lower harness yesterday which was just a starter wiring problem pretty much when u connected the battery the starter would start spinning because my friend who did my wiring for the battery in the back fucked it up but ya its running but wont be able to drive it for a while i had a car slip down tonight and bend my leg in wrong way and now my ankle is twice the size it should be and i cant walk on it
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
dude you need to be more careful, thats like the 3rd time youve told me you got hurt trying to work on your car. jackstands...
LongGrain- Number of posts : 726
Registration date : 2009-04-16
Re: new to forum and my beast
i had jackstands but the jack rolled back which tipped over the jackstands and then the car flopped down i waited till this morning to see if it was any better and it isnt so i have to find my insurance card and someone to drive me to the hospital because i tried driving and even pushin on the gas pedal even hurts too much
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
dammm brutal man,acttack of the cars
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Re: new to forum and my beast
ya my ankle is fucked
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
so wait.. who'd you get a MAF from then to get your car running? Because I know for a fact the one you were getting is still sitting at Rob's place.
Also at 11am today what computer at the hospital were you using to post something on here?
Also at 11am today what computer at the hospital were you using to post something on here?
Re: new to forum and my beast
i had a maf sitting in my garage u forgot about that was up in my raftors yah i have one at robs but i also had an extra one
and i never said i went to the fuckin hospital today i was there all day yesterday with my fuckin dad then last night this happened i never once said i went to the hospital today my friends mom who is a doctor came here because i couldnt drive and she checked it out im goin in a little bit to lik 43 and greenfield to some walkin clinic
i have been at home all day in pain with my leg up and iced do u have anything else to say and i most definitaly have a maf in my car its been in for a week now
and i never said i went to the fuckin hospital today i was there all day yesterday with my fuckin dad then last night this happened i never once said i went to the hospital today my friends mom who is a doctor came here because i couldnt drive and she checked it out im goin in a little bit to lik 43 and greenfield to some walkin clinic
i have been at home all day in pain with my leg up and iced do u have anything else to say and i most definitaly have a maf in my car its been in for a week now
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
i was referring to you telling ben you were at the hospital when you talked to him at 11am.
So thursday can we pick up seats, rims, and TA?
So thursday can we pick up seats, rims, and TA?
Re: new to forum and my beast
yah but i need specific times my dad just got out of the hospital today and is back home somebody is suppose to be home with him at all times for atleast 2 weeks so i will need a time to set up someone else being here and find someone who can come
forcedtojoin- Number of posts : 153
Age : 34
Location : Mil-town
Vehicle : 91 nissan 240sx
Registration date : 2009-04-20
Re: new to forum and my beast
how about you pick a time on thursday so you stop canceling and we will make it work in our schedules.
Page 1 of 2 • 1, 2
Midwest240sx :: Forums :: Progress
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum