Tail lght issue
+2
David
boosted97sx
6 posters
Midwest240sx :: Forums :: Technical
Page 1 of 1
Tail lght issue
Well i drove the car the other day and things were fine...after i got out i noticed that the tail lights were on....so i made sure the lights were off, checked the fuse and it looked good, I had to take the fuse out to get the tail lights to go off.......
Any idea what would cause them to stay on all the time even when the cars not running?
Any idea what would cause them to stay on all the time even when the cars not running?
boosted97sx- Number of posts : 155
Age : 46
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: Tail lght issue
switch is stuck? do your headlights or running lights stay on also?
David- Number of posts : 166
Location : Hanover park
Vehicle : Is a work in progress.
Registration date : 2009-02-24
Re: Tail lght issue
nope just the tail lights
boosted97sx- Number of posts : 155
Age : 46
Location : New Orleans / Central IL
Registration date : 2009-01-27
Re: Tail lght issue
so ur getting constant power to your tailights? hrmm
David- Number of posts : 166
Location : Hanover park
Vehicle : Is a work in progress.
Registration date : 2009-02-24
Re: Tail lght issue
lol. im sorry i laughed its just, you have the same problem i had with my first hatch. tail lights wouldnt shut off unless i disconnected the battery. its probably faulty wiring. good luck dude.
DockSide55- Number of posts : 1201
Location : Chicago
Vehicle : 93' Fastback
Registration date : 2009-01-19
Re: Tail lght issue
short to power before the fuse and after the light switch..will cause the lights to stay on
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Re: Tail lght issue
Its the contact point for the brake switch
I was just messing with this earlier .If you look underneath (be upside down )where your brake pedal is ,you will see a switch.there is a black circular piece of plastic on the other side of the switch.Either its ;broken,not there or is smashed in the middle .What i did is jb weld a dime to the plastic piece
also check the switch and the connector to see if its loose or jiggles
to better explain .check out this link http://forums.nicoclub.com/zerothread?id=272469
hope this helps
I was just messing with this earlier .If you look underneath (be upside down )where your brake pedal is ,you will see a switch.there is a black circular piece of plastic on the other side of the switch.Either its ;broken,not there or is smashed in the middle .What i did is jb weld a dime to the plastic piece
also check the switch and the connector to see if its loose or jiggles
to better explain .check out this link http://forums.nicoclub.com/zerothread?id=272469
hope this helps
stackedclutch- Number of posts : 29
Age : 36
Location : sideways
Vehicle : 1990 nissan 240sx Coupe'
Registration date : 2009-05-30
Re: Tail lght issue
i had the same problem after did my breaks and my problem was i didn't bleed the brakes enough which cause my pedal to stay low enough to keeps the lights on
s_harris- Number of posts : 70
Age : 33
Location : waukesha
Vehicle : 1992 DODGE SHADOW!!!
Registration date : 2009-03-18
Re: Tail lght issue
problem solved yet?
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Midwest240sx :: Forums :: Technical
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum