PortalLSD Install Started!!
4 posters
Midwest240sx :: Forums :: Technical
Page 1 of 1
LSD Install Started!!
by eS 13_maJiK Tue Mar 03, 2009 8:31 pm
K guys, sry Flick I decided not to weld my diff, I saw the sale on Frsport couldn't resist...Just picked up a Kaaz 2 way diff $750 shipped!!! I'm going to put this in at school when I get back from break and will have a full install w/pics (obviously). ETA...March 23rd is when i'm starting the install. This is the reason why I cant go to Bdubs haha and I gotta pay to fix the vDub...IDK if this should go in here or if a mod want to move it to the Progress thread..whichever works for me
Last edited by eS 13_maJiK on Thu Mar 26, 2009 2:56 pm; edited 1 time in total
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
lizmo- Admin
- Number of posts : 780
Age : 37
Location : milwaukee
Vehicle : 240sx & sc300 both 2jz powered :)
Registration date : 2009-01-28 -
Re: LSD Install Started!!
by eS 13_maJiK Tue Mar 10, 2009 6:28 pm
Just got the Diff yesterday, might start the install early if my teacher lets me
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Re: LSD Install Started!!
by Flicktitty Wed Mar 11, 2009 12:20 am
Good stuff, your car is gonna feel great with the LSD and the coil's.
car's in good hands.
car's in good hands.
Flicktitty- Admin
- Number of posts : 1546
Age : 37
Location : Wisconsin
Registration date : 2009-01-19
Re: LSD Install Started!!
by eS 13_maJiK Wed Mar 25, 2009 11:01 pm
delayed till next week..or at least tomarrow if I finish the diff up on the k1500 im working on
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Re: LSD Install Started!!
by eS 13_maJiK Thu Mar 26, 2009 12:47 pm
o yea ran into a delay with the truck (pinion seal crushed during install, had to wait an hour for parts) so I got to pull in the 240 and pulled out the diff housing..so next week I start taking out the open diff and put in the lsd
LSD Install:
Step 1. Remove differential housing Est time 30 min or less (depending on rust issues, I had none Florida cars FTW haha)
LSD Install:
Step 1. Remove differential housing Est time 30 min or less (depending on rust issues, I had none Florida cars FTW haha)
- Start by removing the 4 bolts (14mm) from the driveshaft to the pinion flange
-Have the e-brake engaged to prevent DS from moving making it easier to remove bolts
-After removing driveshaft hang with either bungie cord, wire, ect
-After removing driveshaft hang with either bungie cord, wire, ect
- Now remove 6 bolts (14mm) from each of the CV axles
_Once again have ebrake engaged to prevent wheel movement
-Leave the axles unbolted and still in the housing, they will come out when you drop the housing
-Leave the axles unbolted and still in the housing, they will come out when you drop the housing
- Remove 4 nuts (17mm) connected to the chassis to the diff housing
-Remove the two bolts (14mm) at each sway bar bushing to help housing removal,(clearance issues, pinion flange hits) sway bar will drop enough so the flange won't get caught up
-Have some one there to help you or a trans jack to hold the housing before you remove the last two bolts stated below
-Have some one there to help you or a trans jack to hold the housing before you remove the last two bolts stated below
- Remove the 2 bolts (17mm) from the crossmember to the housing and the housing will drop
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Re: LSD Install Started!!
by lilskyline240 Sat Mar 28, 2009 12:30 pm
yeah man make sure u have help or the Diff secured to a jack before u take out that last bolt... I dropped my diff on my forearm when i was swapping it out last time...
That shit hurt sooooooo bad
That shit hurt sooooooo bad
lilskyline240- Number of posts : 848
Age : 37
Location : Milwaukee WI
Vehicle : 90 coupe RB30det
Registration date : 2009-01-30 -
Re: LSD Install Started!!
by eS 13_maJiK Wed Apr 08, 2009 8:55 am
All done...Im lazy and didnt finish my writeup..I will tho
eS 13_maJiK- Number of posts : 738
Age : 35
Registration date : 2009-02-03
Midwest240sx :: Forums :: Technical
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum